LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> Impala Police >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 4T65-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - Off Vehicle >> Case Cover Bearing Disassemble >> Disassembly

Case Cover Bearing Disassemble: Disassembly

    Fig 1: Pressing Out Drive Shaft Bearing Assembly
    GM49302Courtesy of GENERAL MOTORS CORP.
  1. Assemble J 8092:  driver handle and J 41991:  bearing remover/installer for bearing removal.
  2. Place the case cover (400) on a clean, flat surface with the spacer plate mating surface up.
  3. Using the assembled tool, press the drive shaft bearing assembly (431) from the case cover (400).
scientia non olet · About LEMON Manuals