Heater and Air Conditioning Control Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement . |
|
| 1 | Heater and A/C Control Assembly Screw (Qty: 2)
CAUTION:
Refer to Fastener Caution
. Tip: Disconnect the HVAC control assembly electrical connector. Tighten: 1.5 N.m (13 lb in) |
| 2 | Heater and Air Conditioning Control Assembly Refer to Control Module References for programming and setup information. |