Seat Cushion Outer Trim Panel Replacement (Impala)
| Callout | Component Name |
|---|---|
| 1 | Recliner Handle (If equipped) Tip: Using a flat-bladed tool, push the retainer clip downward and pull outward to release the handle. |
| 2 | Lumbar Actuator Handle (If equipped) Tip: Pull outward to remove. |
| 3 | Power Seat Switch Knob (If equipped) Tip: Pull outward to remove. |
| 4 | Seat Cushion Outer Trim Panel Screw (Qty: 2)
CAUTION:
Refer to Fastener Caution
.
Tighten: 2 N.m (18 lb in) |
| 5 | Seat Cushion Outer Trim Panel Procedure: Disconnect the electrical connector. |