LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> Impala LTZ >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 4T65-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - On Vehicle >> Transmission Brace Replacement (RPOs LZ9/LZE) >> Installation Procedure

Installation Procedure

    Fig 1: Transmission Brace & Bolts
    GM1619383Courtesy of GENERAL MOTORS CORP.
  1. Install the transmission brace (1).
    2. CAUTION: Refer to Fastener Caution .
  2. Install the transmission brace bolts (2).

    Tighten:  Tighten the bolts to 50 N.m (37 lb ft).

    3. Fig 2: View Of Engine Mount Bracket
    GM1551855Courtesy of GENERAL MOTORS CORP.
  3. Install the right engine mount bracket. Refer to Engine Mount Bracket Replacement - Right Side .
scientia non olet · About LEMON Manuals