LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> Impala LTZ >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 4T65-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - Off Vehicle >> 1-2 Support Drum and Forward Band Removal >> Removal

1-2 Support Drum and Forward Band Removal: Removal

    Fig 1: J 38358-A & 1-2 support Drum Assembly
    GM1818442Courtesy of GENERAL MOTORS CORP.
  1. Install J 38358-A:  remover and installer onto the 1-2 support drum assembly (683-687).
  2. Lift J 38358-A:  remover and installer with the 1-2 support drum out of the case.
  3. Fig 2: Locating Forward Band Assembly
    GM893327Courtesy of GENERAL MOTORS CORP.
  4. Tilt the forward band assembly (688) in order to disengage the band from the anchor pin in the case. Remove the forward band assembly.