LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> Impala LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Engine Mechanical - 3.6L (Ly7) (Repair Instructions -- 3 Of 5)) >> Off-Vehicle Repair Instructions - Part 2 >> Intake Manifold Assemble >> Lower Intake Manifold Assemble Procedure

Lower Intake Manifold Assemble Procedure

WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Fuel Injector Rail Bolts
    GM1531038Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel injector rail.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the fuel injector rail bolts.

    Tighten:  Tighten the fuel injector rail bolts to 10 N.m (89 lb in).

  4. Fig 2: Fuel Injector Wiring Harness
    GM1531036Courtesy of GENERAL MOTORS CORP.
  5. Install the fuel injector wiring harness connector.