LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> Impala LTZ >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Rear Compartment Lid Strut Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Removing & Installing Rear Compartment Lid Strut
    GM738146Courtesy of GENERAL MOTORS CORP.
  1. Press the rear compartment lid assist rod onto the upper rear compartment lid assist rod ball stud.
  2. Press the rear compartment lid assist rod onto the lower assist rod ball stud.
  3. Ensure that both clips are fully seated on the rear compartment assist rod.
  4. Close the rear compartment.
scientia non olet · About LEMON Manuals