LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> Impala LTZ >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Front Side Door Conduit Replacement (Impala) >> Removal Procedure

Removal Procedure

    Fig 1: Front Door Rubber Conduit
    GM319803Courtesy of GENERAL MOTORS CORP.
  1. Remove the right instrument panel insulator if removing the right conduit. Refer to Instrument Panel Insulator Panel Replacement - Right Side .
  2. Remove the door rubber conduit from where it attaches at the windshield pillar.
  3. Disconnect the body harness electrical connector from the front door wiring harness.
  4. Remove the conduit from the front door.
  5. Remove the front door wiring harness out from the rubber conduit.
scientia non olet · About LEMON Manuals