LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> Impala LTZ >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Front Side Door Adjustment >> Fore/Aft Adjustment

Fore/Aft Adjustment

    NOTE: Do not remove the bolts.
    Fig 1: Front Door Hinge & Components
    GM164543Courtesy of GENERAL MOTORS CORP.
  1. Loosen the body side hinge bolts (1).
    2. NOTE: Do not remove the cone adjuster bolt.
  2. Loosen the body side hinge cone adjuster bolt (3).
    3. NOTE: Do not remove the TORX® bolt (2).
  3. Loosen the TORX® body side hinge bolt.
  4. Adjust the door fore and aft as required.
    5. CAUTION: Refer to Fastener Caution .
  5. Tighten the TORX® body side hinge bolt (2).

    Tighten:  Tighten the TORX® body side hinge bolt to 10 N.m (89 lb in).

  6. Tighten the cone adjuster side hinge bolt (3).

    Tighten:  Tighten the cone adjuster side hinge bolt to 10 N.m (89 lb in).

  7. Tighten the body side hinge bolts (1).

    Tighten:  Tighten the door hinge to body bolts to 33 N.m (24 lb ft).

scientia non olet · About LEMON Manuals