Stabilizer Shaft Link Replacement

Fig 1: View Of Stabilizer Shaft Link

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle . Remove the front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
1	Front Stabilizer Shaft Link Nut (Qty: 2) CAUTION: Refer to Fastener Caution . Tip: Some models maybe equipped with a washer/spacer between the stabilizer link and the shock strut. It will be necessary to transfer the washer/spacer when replacing the stabilizer shaft or the stabilizer link. Tighten: 80 N.m (59 lb ft)
2	Front Stabilizer Shaft Link

Callout

Component Name

Preliminary Procedures

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Remove the front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .

Front Stabilizer Shaft Link Nut (Qty: 2)

CAUTION: Refer to Fastener Caution .

Tip: Some models maybe equipped with a washer/spacer between the stabilizer link and the shock strut. It will be necessary to transfer the washer/spacer when replacing the stabilizer shaft or the stabilizer link.

Tighten: 80 N.m (59 lb ft)

Front Stabilizer Shaft Link