Rear Seat Belt Replacement

Fig 1: View Of Rear Seat Belt

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the rear lower quarter panel trim. Refer to Quarter Lower Rear Trim Panel Replacement .
1	Shoulder Belt Anchor Plate Bolt CAUTION: Refer to Fastener Caution . Tip: Lean seat back forward to allow easier access to fastener. Tighten: 43 N.m (32 lb ft)
2	Rear Seat Shoulder Belt Guide Cover
3	Rear Seat Shoulder Belt Guide Bolt Tighten: 43 N.m (32 lb ft)
4	Rear Seat Belt Retractor Bolt Tighten: 43 N.m (32 lb ft)
5	Rear Seat Belt Retractor