Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

DTCs P0030, P0053, P0068, P0101, P0102, P0103, P0106, P0107, P0108, P0116, P0117, P0118, P0120, P0121, P0122, P0123, P0128, P0131, P0132, P0133, P0134, P0135, P0201-P0204, P0220, P0222, P0223, P0300, P0442, P0443, P0446, P0449, P0451, P0452, P0453, P0454, P0455, P0496, P0506, P0507, P060D, P1133, P1516, P2101, P2119, P2120, P2122, P2123, P2125, P2127, P2128, P2135, P2138, P2176, P2A00 are not set.
The engine is in CL status.
The engine coolant temperature (ECT) is between -7 and +120°C (+19.4 and +248°F).
The intake air temperature (IAT) is between -7 and +145°C (+19.4 and +293°F).
The manifold absolute pressure (MAP) is between 15-100 kPa.
The vehicle speed is less than 132 km/h (82 mph).
The engine speed is between 400-6,100 RPM.
The mass air flow (MAF) is between 1-512 g/s.
The barometric pressure (BARO) is more than 74 kPa.
The fuel level is more than 10 percent.
These DTCs run continuously when the above conditions have been met.