Conditions for Running the DTC: P013E

WARNING: This page is about a different variant/trim than selected.

DTCs P0030, P0036, P0053, P0054, P0101, P0102, P0103, P0106, P0107, P0108, P0120, P0121, P0122, P0123, P0131, P0132, P0133, P0134, P0135, P0137, P0138, P013A, P013B, P013E, P013F, P0140, P0141, P0171, P0172, P0201, P0202, P0203, P0204, P0220, P0222, P0223, P0300, P0442, P0443, P0446, P0449, P0455, P0496, P1133, P1174, P1516, P2101, P2119, P2135, P2176, P2270, P2271, P2A00 are not set
The system voltage is between 10-18 volts.
The fuel level is more than 10 percent.
The engine run time is equal to or more than 40 seconds.
THEN
The decel fuel cutoff (DFCO) is active.
The accelerator pedal position (APP) is stable.
The torque converter clutch (TCC) is locked.
DTC P2270 has run and passed.
This DTC runs once per trip.