LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> HHR SS, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Controls And Fuel - 2.2L Or 2.4L - Introduction) >> Repair Instructions >> Fuel Tank Vent Pipe Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying Fuel Tank Vent Pipe
    GM1636693Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel tank. Refer to Fuel Tank Replacement .
  2. Disconnect the fuel tank vent pipe quick connect fitting from the module and the valve. Refer to Plastic Collar Quick Connect Fitting Service .
  3. Remove the fuel tank vent pipe from the fuel tank.
  4. Fig 2: Identifying Fuel Tank Vent Pipe
    GM1636697Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the fuel tank vent pipe quick connect fittings from module and the valves. Refer to Plastic Collar Quick Connect Fitting Service .
  6. Remove the fuel tank vent pipe from the fuel tank.