LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> HHR SS, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Controls And Fuel - 2.2L Or 2.4L - Introduction) >> Repair Instructions >> Fuel Tank Vent Pipe Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying Fuel Tank Vent Pipe
    GM1636697Courtesy of GENERAL MOTORS CORP.
  1. Connect the fuel tank vent pipe quick connect fittings to the module and the valves. Refer to Plastic Collar Quick Connect Fitting Service .
  2. Install the fuel tank vent pipe to the fuel tank.
    3. Fig 2: Identifying Fuel Tank Vent Pipe
    GM1636693Courtesy of GENERAL MOTORS CORP.
  3. Connect the fuel tank vent pipe quick connect fitting to the module and the valve. Refer to Plastic Collar Quick Connect Fitting Service .
  4. Install the fuel tank vent pipe to the fuel tank.
  5. Install the fuel tank. Refer to Fuel Tank Replacement .
scientia non olet · About LEMON Manuals