Fuel Tank Draining Procedure
WARNING: This page is about a different variant/trim than selected.
- Remove the fuel filler cap.
- Install the J 42960-2 , or equivalent, into the fuel fill pipe in order to hold the door open.
- Insert the J 43290 (2) through the J 42960-2 (1) and into the fill pipe.
- Continue to insert the J 43290 (2) into the fill pipe until the hose exits the valve (1) and reaches the bottom of the tank.
- Use an air operated pump device in order to drain as much fuel out through the J 43290 (1) as possible.