LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> HHR SS, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Controls And Fuel - 2.2L Or 2.4L - Introduction) >> Repair Instructions >> Fuel Feed Intermediate Pipe Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying Fuel Feed Intermediate Pipe
    GM1636696Courtesy of GENERAL MOTORS CORP.
  1. Connect the fuel feed intermediate pipe quick connect fitting to module. Refer to Plastic Collar Quick Connect Fitting Service .
  2. Install the fuel feed intermediate pipe to the fuel tank.
  3. Install the fuel tank. Refer to Fuel Tank Replacement .
scientia non olet · About LEMON Manuals