LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> HHR SS, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 2.2L Or 2.4L) >> Repair Instructions - On Vehicle >> Piston Oil Nozzle Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Piston Oil Nozzle Assembly
    GM1594334Courtesy of GENERAL MOTORS CORP.
  1. Remove the engine oil pan. Refer to Oil Pan Replacement .
  2. Rotate the crankshaft so that cylinders 1 and 4 are at top dead center (TDC).
  3. Remove the piston oil nozzles from cylinders 1 and 4 using a 3/8 inch wobble extension drive with a 6 mm hex drive bit. Remove the piston oil nozzles. (Crankshaft removed for illustrative purposes.)
  4. Rotate the crankshaft so that cylinders 2 and 3 are at TDC. Remove the piston oil nozzles.
scientia non olet · About LEMON Manuals