LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> HHR SS, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 2.2L Or 2.4L) >> Repair Instructions - On Vehicle >> Oil Level Indicator and Tube Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying Oil Level Indicator
    GM1571745Courtesy of GENERAL MOTORS CORP.
  1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
  2. Remove the oil level indicator.
    3. Fig 2: Identifying Engine Harness Clips
    GM1627740Courtesy of GENERAL MOTORS CORP.
  3. Remove the engine harness clip (1) from the oil level indicator tube bracket.
    4. Fig 3: Identifying A/C Compressor & Condenser Hose Clip
    GM1718437Courtesy of GENERAL MOTORS CORP.
  4. Remove the air conditioning (A/C) compressor and condenser hose clip (1) from the oil level indicator tube bracket.
    5. Fig 4: Identifying Oil Level Indicator Tube & Bolt
    GM1623540Courtesy of GENERAL MOTORS CORP.
  5. Remove the oil level indicator tube bolt (2).
  6. Remove the oil level indicator tube (1).
  7. Remove the oil level indicator tube O-ring seals, if necessary.
scientia non olet · About LEMON Manuals