LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> HHR SS, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 2.2L Or 2.4L) >> Repair Instructions - On Vehicle >> Crankshaft Rear Oil Seal Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Crankshaft Rear Oil Seal & Special Tool J 42067
    GM412495Courtesy of GENERAL MOTORS CORP.
  1. Using the J 42067  , install a NEW crankshaft real oil seal.
  2. Install the flywheel. Refer to Engine Flywheel Replacement .
scientia non olet · About LEMON Manuals