LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> HHR SS, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 2.2L Or 2.4L) >> Repair Instructions - Off Vehicle >> Crankshaft and Bearing Installation >> Special Tools

Special Tools

WARNING: This page is about a different variant/trim than selected.

For equivalent regional tools, refer to Special Tools .

Fig 1: Measuring Bearing Bore
GM2146320Courtesy of GENERAL MOTORS CORP.
NOTE: If crankshaft bearing failure is due to other than normal wear, investigate the cause. Inspect the crankshaft or connecting rod bearing bores.

Inspect the connecting rod bearing bores or crankshaft main bearing bores using the following procedure:

scientia non olet · About LEMON Manuals