LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> HHR SS, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 2.2L Or 2.4L) >> Repair Instructions - Off Vehicle >> Crankshaft Front Oil Seal Installation >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Crankshaft/Front Main Seal & Special Tool J 35268-A
    GM414081Courtesy of GENERAL MOTORS CORP.
  1. Install the seal into the front cover using the J 35268-A  .
  2. Ensure that the engine front cover is properly supported when installing the seal.
scientia non olet · About LEMON Manuals