Special Tools

WARNING: This page is about a different variant/trim than selected.

Illustration	Tool Number/Description
Courtesy of GENERAL MOTORS CORP.	J 7079-2 Universal Driver Handle - Non-threaded
Courtesy of GENERAL MOTORS CORP.	J 8092 Universal Driver Handle - 3/4 in - 10
Courtesy of GENERAL MOTORS CORP.	J 22828 Input and Countershaft Race Installer
Courtesy of GENERAL MOTORS CORP.	J 23907 Slide Hammer with Bearing Adapter
Courtesy of GENERAL MOTORS CORP.	J 24433 Press Tube
Courtesy of GENERAL MOTORS CORP.	J 28406 Bearing and Seal Installer
Courtesy of GENERAL MOTORS CORP.	J 35616 GM-Approved Terminal Test Kit
Courtesy of GENERAL MOTORS CORP.	J 36513 Gear and Bearing Separator Plate
Courtesy of GENERAL MOTORS CORP.	J 44375 Assembly Pallet
Courtesy of GENERAL MOTORS CORP.	J 44376 Bearing Pusher/Puller
Courtesy of GENERAL MOTORS CORP.	J 44377 Input Shaft Anti-Rotation Tool
Courtesy of GENERAL MOTORS CORP.	J 44378 Press Adapter - all shafts
Courtesy of GENERAL MOTORS CORP.	J 44379 Differential Bearing Puller Plate
Courtesy of GENERAL MOTORS CORP.	J 44380 Differential Bearing Race Puller
Courtesy of GENERAL MOTORS CORP.	J 44381 Shifter Bearing/Input and Output Bearing Remover
Courtesy of GENERAL MOTORS CORP.	J 44382 Countershaft Needle Bearing Puller
Courtesy of GENERAL MOTORS CORP.	J 44383 Countershaft Bearing Installer - to case
Courtesy of GENERAL MOTORS CORP.	J 44385 Differential Bearing Race and Seal Installer
Courtesy of GENERAL MOTORS CORP.	J 44386 Input/Output Bearing Installer
Courtesy of GENERAL MOTORS CORP.	J 44387 Output Shaft Bearing Sleeve Installer and Pin
Courtesy of GENERAL MOTORS CORP.	J 44388 Final End Checking Fixture
Courtesy of GENERAL MOTORS CORP.	J 44389 Countershaft Bearing Installer