Transmission Control Replacement
WARNING: This page is about a different variant/trim than selected.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Disconnect the shift cables from the shift control. Refer to Shift Cable Replacement . |
|
| 1 | Instrument Panel Center Support Bracket. Refer to Instrument Panel Center Support Bracket Replacement . |
| 2 | Shift Control Nut (Qty: 4)
CAUTION:
Refer to Fastener Caution
.
Tighten: 10 N.m (89 lb in) |
| 3 | Shift Control Bolt (Qty: 4) |
| 4 | Shift Control |