Removal Procedure

WARNING: This page is about a different variant/trim than selected.

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

Fig 1: Identifying Oil Pan Bolts

GM104466

Courtesy of GENERAL MOTORS CORP.

Loosen the oil pan bolts.
Drain the oil. Use a suitable container to catch the transmission fluid.
Remove the oil pan attaching bolts.

Fig 2: View of Oil Pan

GM104468

Courtesy of GENERAL MOTORS CORP.

Remove the oil pan.

Fig 3: Locating Oil Pan Gasket

GM104471

Courtesy of GENERAL MOTORS CORP.

Remove the oil pan gasket.