LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> HHR SS, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission - 4T45-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - Off Vehicle >> Wiring Harness Connection

Wiring Harness Connection

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying Wiring Harness Pass Thru Connector
    GM20312Courtesy of GENERAL MOTORS CORP.
  1. Inspect the wiring harness (11) for damage.
  2. Inspect the pass thru connector pins and o-ring seal for damage.
  3. Assemble the wiring harness pass thru connector into the transaxle case bore from the inside of the transaxle case.