LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> HHR SS, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission - 4T45-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - Off Vehicle >> Wire Harness Disconnect

Wire Harness Disconnect

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying Wiring Harness Connectors
    GM1205809Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the wiring harness connectors from the pressure control solenoid (312).
  2. Disconnect the wiring harness connectors from the 1-2 and 2-3 shift solenoids (305).
  3. Disconnect the wiring harness connectors from the pressure switch assembly (13)
  4. Disconnect the wiring harness connectors from the TCC solenoid (335).