LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> HHR SS, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission - 4T45-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - Off Vehicle >> Input Internal Gear, Forward Clutch Hub Assemble >> Assembly Procedure

Assembly Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Input Internal Gear & Forward Clutch Hub
    GM20252Courtesy of GENERAL MOTORS CORP.
  1. Assemble the forward clutch hub (577) onto the input internal gear (560) and retain it with the snap ring (578).
  2. Assemble the thrust washer (109) onto the forward clutch hub (577) with the thrust washer tabs toward the forward clutch hub (577). Retain the thrust washer with J 36850:  lubricant or equivalent.
scientia non olet · About LEMON Manuals