LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> HHR SS, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission - 4T45-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - Off Vehicle >> Control Valve Body Spacer Plate Removal

Control Valve Body Spacer Plate Removal

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Spacer Plate Support & Spacer Plate
    GM1844265Courtesy of GENERAL MOTORS CORP.
  1. Remove the 2 spacer plate support bolts (20).
  2. Remove the spacer plate support (21).
  3. NOTE: The Non-Electronic Range Select Mode 4T40-E/4T45-E has a different spacer plate than the 4T45-E Electronic Range Select Mode transmission.
  4. Remove and discard the spacer plate assembly (90).