LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> HHR SS, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission - 4T45-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Diagnostic Information And Procedures >> Transmission Fluid Cooler Flushing and Flow Test (J 35944-A) >> Clean-up

Transmission Fluid Cooler Flushing and Flow Test (J 35944-A): Clean-up

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the water supply hose from the J 35944-A:  oil cooler and line flusher and bleed any remaining air pressure from the flusher tank.
  2. Remove the fill cap from the J 35944-A:  oil cooler and line flusher and return any unused flushing solution to its container. Rinse the J 35944-A:  oil cooler and line flusher with water. Do not store the J 35944-A:  oil cooler and line flusher with flushing solution in it.
  3. After every third use, clean the J 35944-A:  oil cooler and line flusher as described in the instructions included with the tool.
  4. Dispose of any waste water/solution and transmission fluid in accordance with local regulations.
scientia non olet · About LEMON Manuals