LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> HHR SS, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission - 4T45-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Description And Operation >> Automatic Transmission Hydraulic Diagrams >> Reverse (With Electronic Range Select Mode) >> Cooler and Lube >> Lube 1

Lube 1

WARNING: This page is about a different variant/trim than selected.

Cooler fluid is routed through the transmission oil cooler, which is located in the vehicle radiator, and into the lube 1 fluid circuit. Lube 1 fluid is routed through the input shaft in order to lubricate the transmission components in the front of the transmission.

scientia non olet · About LEMON Manuals