Front Seat Cushion Outer Trim Panel Replacement (Power)

Fig 1: View Of Front Power Seat Cushion Outer Trim Panel

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the front seat. Refer to Front Seat Replacement - Bucket . Remove the recliner handle. Refer to Driver or Passenger Seat Recliner Handle Replacement .
1	Seat Riser Finish Cover Screw (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten: 2 N.m (18 lb in)
2	Seat Riser Finish Front Cover Tip: Pull out the front and side covers at the same time to gain access to the screw on the back side of the front corner.
3	Seat Riser Finish Cover Screw Tighten: 2 N.m (18 lb in)
4	Seat Riser Finish Outboard Cover Tip: Disconnect the seat switch electrical connectors. Remove the switches from the cover if replacing the cover.