Front Seat Back Recliner Inner Trim Panel Replacement

Fig 1: Identifying Front Seat Back Recliner Inner Trim Panel

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the front seat. Refer to Front Seat Replacement - Bucket .
1	Seat Back Cushion Latch Release Handle
2	Seat Recliner Finish Cover Screw CAUTION: Refer to Fastener Caution . Tighten: 2 N.m (18 lb in)
3	Seat Recliner Finish Inboard Bottom Cover Tip: Unclip the rear of the cover first then pull away from the front side of the seat to remove.
4	Seat Armrest Refer to Front Seat Armrest Replacement .
5	Seat Recliner Finish Cover Screw Tighten: 2 N.m (18 lb in)
6	Seat Recliner Finish Inboard Top Cover Tip: Unclip the rear of the cover first then pull away from the front side of the seat to remove.