LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> HHR L4-2.0L Turbo >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> Accumulator Springs Installation

Accumulator Springs Installation




Accumulator Springs Installation





Note: The 1-2 accumulator spring (31) is slightly taller than the other two springs (32). Install a 1-2 accumulator spring in the bore closest to the electrical pass-through connector (11).

Install the two remaining accumulator springs into the transmission case accumulator bores.