Rear Bumper Fascia Replacement

Rear Bumper Fascia Replacement










Preliminary Procedure

Caution:Refer to Fastener Caution.

TipCarefully push a small nylon wedge between the fascia and the fender. Insert a small screwdriver into the fascia slot and depress the snaps one at a time and pull on the fascia at the same time to gradually remove the fascia from the bracket.
Tighten
TipCarefully push a small nylon wedge between the fascia and the fender. Insert a small screwdriver into the fascia slot and depress the snaps one at a time and pull on the fascia at the same time to gradually remove the fascia from the bracket.
Tighten