Brake Shoes &/Or Pads: Remove & Replace

Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
ZR-1, All		2.2		B
ZR-1, Front or Rear,Both Sides		1.2		B
Combination Procedure: BRAKE HOSE: Replace:
Each Additional		0.2		B
One	Includes: Bleed Brakes.	0.5		B
Combination Procedure: CALIPER: Overhaul:
ZR-1, Front,One	Includes: Bleed Brakes.	1.3		B
ZR-1, Rear,One	Includes: Bleed Brakes.	0.9		B
Combination Procedure: CALIPER: Replace:
One	Includes: Bleed Brakes.	0.5		B
Combination Procedure: DISC ROTOR: Burnish Brake Rotors While Driving Vehicle:
		0.5		B
Combination Procedure: DISC ROTOR: Correct:
Lateral Runout,Each	Correct Rotor lateral runout by indexing or correction plate.	0.2		B
Combination Procedure: DISC ROTOR (REMOVED): Refinish: DOES NOT include grind hot spots.
Each Additional		0.3		B
One		0.5		B
Combination Procedure: PARKING BRAKE SHOE & LINING: Replace:
Both	Includes: R&I Wheel Hub Assembly.	3.3		B
Combination Procedure: WHEEL BEARING: Replace:
ZR-1, Front,Hub Assembly,One Side		1.5		B
ZR-1, Rear,Hub Assembly,One Side		1.7		B