Fastener Tightening Specifications
WARNING: This page is about a different variant/trim than selected.
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Adapter Plate to Transmission Case Bolts | 48 N.m | 36 lb ft |
| Backup Lamp Switch | 27 N.m | 20 lb ft |
| Computer Aided Gear Select Solenoid | 40 N.m | 30 lb ft |
| Cover Plate Bolts | 20 N.m | 15 lb ft |
| Extension Housing Plug | 27 N.m | 20 lb ft |
| Extension Housing to Transmission Case Bolts | 48 N.m | 36 lb ft |
| Neutral Return Cam Spring Retaining Bolt | 25 N.m | 18 lb ft |
| Reverse Idler Shaft Bracket Bolts | 25 N.m | 18 lb ft |
| Reverse Lockout Assembly Bolt | 18 N.m | 13 lb ft |
| Reverse Lockout Solenoid | 40 N.m | 30 lb ft |
| Shift Detent Assembly | 40 N.m | 30 lb ft |
| Shift Guide Plate Bolts | 22 N.m | 16 lb ft |
| Shift Lever Guide Bolts | 27 N.m | 20 lb ft |
| Temperature Switch | 41 N.m | 30 lb ft |
| Transmission Case Drain Plug | 18 N.m | 13 lb ft |
| Transmission Case Fill Plug | 18 N.m | 13 lb ft |