LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> Corvette Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Manual Transmission - TREMEC 6-Speed) >> Repair Instructions - Off Vehicle >> Synchronizers Disassemble >> 1st/2nd, 3rd/4th, 5th/6th Synchronizers

1st/2nd, 3rd/4th, 5th/6th Synchronizers

WARNING: This page is about a different variant/trim than selected.
    IMPORTANT: Synchronizer components are not interchangeable. Keep all the synchronizer components separate. The synchronizer hubs and the sliding sleeves are a selected assembly. Keep the hubs and the sliding sleeves together as originally assembled.
    Fig 1: View Of Alignment Marks On Synchronizer Hub & Synchronizer Sleeve
    GM4810Courtesy of GENERAL MOTORS CORP.
  1. Scribe a mark on the synchronizer hub and on the sleeve. This will help you to reinstall the parts in the same position.
    2. Fig 2: Identifying Synchronizer Inserts
    GM1887573Courtesy of GENERAL MOTORS CORP.
  2. Remove the synchronizer inserts from the hub.
scientia non olet · About LEMON Manuals