Trip Odometer

The trip odometer displays the accumulated miles or kilometers since the last reset. This value is stored in the IPC. The IPC has 2 trip odometers which can be selected by pressing the DIC information button. Pressing this button allows you to scroll through trip mode A or trip mode B. The displayed trip odometer can be reset by pressing and holding the set/reset button for 3 seconds. Select the specific trip mode (A or B) in order to reset that specific trip odometer. Both trip odometers accumulate miles or kilometers even when they are not displayed. If the set/reset button is pressed and held for 3 seconds while in a trip mode (A or B), the display will reset to zero.