Steering Wheel Theft Deterrent Lock Replacement

Steering Wheel Theft Deterrent Lock Replacement

Removal Procedure





Caution: Refer to SIR Caution .
1. Disable the SIR system. Refer to SIR Disabling and Enabling .
2. Remove the upper and lower trim covers. Refer to Steering Column Trim Covers Replacement (Steering Column Trim Covers Replacement) .
3. Remove the connector (2) from the lock (1).




4. Pry the electric park lock (2) off of the ignition lock cylinder case assembly (1).



Installation Procedure





1. Snap the electric park lock (2) onto the ignition lock cylinder case assembly (1).




Caution: Refer to SIR Inflator Module Coil Caution .
2. Reconnect the connector (2) to the electric park lock (1).
3. Install the upper and lower trim covers. Refer to Steering Column Trim Covers Replacement (Steering Column Trim Covers Replacement) .
4. Enable the SIR system. Refer to SIR Disabling and Enabling .