Seat Belt Buckle Pretensioner Replacement

Seat Belt Buckle Pretensioner Replacement

Removal Procedure

1. Remove the front seat assembly.




2. Disconnect the seat belt reminder wiring harness (3) on the driver's seat.




3. Remove the nut (1) which retains the seat belt buckle to the seat assembly.
4. Remove the seat belt buckle from the seat assembly.

Installation Procedure




1. Install the seat belt buckle to the seat assembly.

Notice: Refer to Fastener Notice.

2. Install the nut (1) which retains the seat belt buckle to the seat assembly.

Tighten the front seat belt buckle nut to 52 N.m (38 lb ft).




3. Connect the seat belt reminder wiring harness (3) on the driver seat.
4. Install the front seat assembly.