Instrument Panel Center Air Outlet Replacement

Instrument Panel Center Air Outlet Replacement

Removal Procedure

1. Remove the left closeout/insulator panel.
2. Remove the knee bolster trim panel.
3. Remove the instrument panel (I/P) cluster bezel, Chevrolet only.
4. Remove the radio.




5. Remove the 2 screws (1) from the bottom of the air outlet assembly.




6. Remove the air deflectors from the outlet.
7. Grasp and pull the outlet rearward from the I/P.




8. Remove the outlet from the vehicle.

Installation Procedure




1. If reinstalling the original outlet, install the air deflectors in the outlet. Refer to Instrument Panel Air Outlet Replacement.
2. Install the outlet assembly to the I/P.






Notice: Refer to Fastener Notice.

3. Install the 2 retaining screws (1).

Tighten the screws to 2.5 N.m (22 lb in).

4. Install the radio.
5. Install the I/P cluster bezel, Chevrolet only.
6. Install the knee bolster trim panel.
7. Install the left closeout/insulator panel.