Rear Seat Number 1 Cushion Pull Strap Replacement

Rear Seat Number 1 Cushion Pull Strap Replacement

Removal Procedure

1. Remove the rear seat cushion assembly from the vehicle.
2. Remove the rear-seat cushion cover and the pad.




3. Remove the strap (1) from the rear seat cushion latch (2).

Installation Procedure




1. Install the small loop (1) onto the rear seat cushion latch (2).




2. Install the strap through the opening in the seat pan.
3. Install the rear-seat cushion cover and the pad.
4. Install the rear seat cushion assembly to the vehicle.