Rear Seat Number 1 Cushion Latch Release Assembly Replacement

Rear Seat Number 1 Cushion Latch Release Assembly Replacement

Removal Procedure

1. Remove the rear seat cushion assembly from the vehicle.
2. Remove the rear seat cushion cover and the pad.




3. Remove the strap (1) from the rear seat cushion latch (2).




4. Remove the 3 bolts securing the rear seat cushion latch to the seat pan.

Installation Procedure






Notice: Refer to Fastener Notice.

1. Install the 3 bolts securing the rear seat cushion latch to the seat pan.

Tighten the rear seat cushion latch release bolts to 10 N.m (88 lb in).




2. Install the small loop (1) onto the rear seat cushion latch (2).
3. Install the strap through the opening in the seat pan.
4. Install the rear seat cushion cover and the pad.
5. Install the rear seat cushion assembly to the vehicle.