Rear Seat Back Cushion Hinge Cover Replacement

Rear Seat Back Cushion Hinge Cover Replacement

Removal Procedure




1. Remove the screws from the inboard/outboard rear seat back hinge covers.
2. Remove the rear seat back hinge cover halves.

Installation Procedure

1. Install the inboard/outboard rear seat back hinge cover halves around the seat back hinges.






Notice: Refer to Fastener Notice.

2. Install the inboard/outboard rear seat back hinge cover screws.

Tighten the rear seat back hinge cover screws to 2 N.m (18 lb in).