Instrument Panel Insulator Panel Replacement (GMC/Chevrolet)

Instrument Panel Insulator Panel Replacement (GMC/Chevrolet)

Removal Procedure




1. Remove the floor console.
2. Remove the 4 screws that retain the closeout panel to the instrument panel (I/P) substrate.
3. Remove the closeout panel from the vehicle.

Installation Procedure




1. Install the closeout panel to the vehicle.

Notice: Refer to Fastener Notice.

2. Install the 4 screws that retain the closeout panel to the I/P.

Tighten the screws to 1.9 N.m (17 lb in).

3. Install the floor console.