Hood Latch Support Replacement

Hood Latch Support Replacement

Removal Procedure

1. Remove the headlamp housing panel.
2. Remove the hood latch.




3. Remove the bolts that retain the hood latch support to the radiator support.
4. Remove the hood latch support from the vehicle.

Installation Procedure




1. Install the hood latch support to the vehicle.

Notice: Refer to Fastener Notice.

2. Install the bolts that retain the hood latch support to the radiator support.

Tighten the bolts to 20 N.m (15 lb ft).

3. Install the hood latch.
4. Install the headlamp housing panel.