LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Optra LT, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Front Brake Hose Replacement >> Removal Procedure

Removal Procedure

  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the retainer.
  3. Disconnect the brake pipe line from the brake hose support bracket on the wheel housing on each side of the vehicle.
    Fig 1: View Of Brake Hose, C Bracket And Wheel Housing Support Bracket
    GM1289931Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the brake hose from the C bracket on the steering knuckle shaft.
  5. Remove the bolt from the brake caliper.
  6. Remove the seal rings and the disc brake hose.
scientia non olet · About LEMON Manuals