LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Optra LT, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Brake Pedal Assembly Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Brake Pedal Brace Nuts
    GM1289937Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the brace with the nuts.

    Tighten:  Tighten the brace nuts to 22 N.m (16 lb ft)  .

  2. Install the brake pedal.
    3. Fig 2: View Of Removed Instrument Panel
    GM1289936Courtesy of GENERAL MOTORS CORP.
  3. Install the I/P. Refer to Instrument Panel Assembly Replacement .
scientia non olet · About LEMON Manuals