LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Optra LT, Automatic >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transaxle - ZF 4HP 16 - Service, Overhaul, Removal & Installation, Troubleshooting & Diagnosis >> Transmission Rear Cover Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Rear Cover And Bolts
    GM1255980Courtesy of GENERAL MOTORS CORP.
  1. Install the rear cover.
  2. NOTE: Refer to Fastener Notice .
  3. Install the rear cover bolts.

    Tighten:  Tighten the bolts to 23 N.m (17 lb ft)  .

  4. Turn the transaxle by 90 degrees.
  5. Fig 2: View Of Sealing Sleeve
    GM1255951Courtesy of GENERAL MOTORS CORP.
  6. Install the sealing sleeve (Brake C).
  7. Install the valve body assembly. Refer to Control Valve Body Replacement .